Text
An introduction to fiber optic systems
Terdapat bibliografi dan indeks.
CONTENTS:
1. Introduction
1.1 Fiber advantages
1.2 Fiber disadventages
1.3 History
1.4 Textbook and other sources
2. The Optical Fiber
2.1 Introduction
2.2 Optical convinement
2.3 Waveguide modes in step-index fibers
2.4 Multimode step-index fibers
2.5 Numerical aperture
2.6 Step-index single-mode fibers
2.7 Graded-index multimode fibers
3. Fiber Properties
3.1 Introduction
3.2 Fiber losses
3.3 Dispersion
3.4 Fiber strength
4. Optical Sources
4.1 Introduction
4.2 Light generation by semiconductors
4.3 Light emitting diodes
4.4 Laser-diode source
4.5 Laser temperature dependence
4.6 Source reliability
4.7 Souce noise
4.8 Electronic driving circuits
4.9 Source-to-fiber coupling
5. Optical Receivers
5.1 Introduction
5.2 Optical detectors
5.3 Receiver sensitivity and bit-error rate
5.4 Optical receiver noise and sensitivity
5.5 Amplifier noise
5.6 Eye pattern analysis
6. Optical Link Design
6.1 Introduction
6.2 Joining losses
6.3 Joint losses: single-mode fiber
6.4 Reflection losses
6.5 Fiber end preparation
6.6 Splices
6.7 Connectors
6.8 Commercial connectors
6.9 Spice/connector loss measurement
6.10 Couplers
7. Fiber Optic Networks
7.1 Introduction
7.2 Source selection
7.3 Power budget
7.4 Dynamic range
7.5 Timing analysis
7.6 Data coding
7.7 Commercial fiber-optic modules
7.8 Optical amplifiers
8. Fiber-optic networks
8.1 Introduction
8.2 Network topologies
8.3 Network design tradeoffs
8.4 Preposed standard fiber networks
8.5 FDDI networks
8.6 SONET/SDH
9. Coherent techniques
9.1 Introduction
9.2 Coherent systems
9.3 Coherent detection
9.4 Improvement in system performance
9.5 Component requirements
9.6 Polarization manipulation techniques
10. Wavelength-Division Multiplexing
10.1 Introduction
10.2 Wavelength-selective WDM vs. broadband WDM
10.3 Multiplexers
10.4 Source
10.5 Multipoint, multiwavelength networks
10.6 Nonlinear effects on WDM links
11. Fiber-optic sensors
11.1 Introduction
11.2 Senor systems
11.3 Amplitude-modulation sensors
11.4 Evanescent sensors
11.5 Phase sensors
11.6 Fiber-optic gyroscope
11.7 Polarimetric sensors
12. Fiber farication and characterization
12.1 Introduction
12.2 Glass
12.3 Preform fabrication
12.4 Double-crucible technique
12.5 Fiber drawing
12.6 Fiber coating
12.7 Polymer-clad silica (PCS) fibers
12.8 Preforms and fiber-profile characterization
12.9 Cables
13. Measurement of fiber parameters
13.1 Introduction
13.2 Attenuation measurements
13.3 Dispersion measurements
13.4 Single-mode fiber parameters
No other version available